DS-EN-1000 (07)
800-232-3539
610-367-2260
Fax 877-647-4011
www.penflex.com
sales@penflex.com
5
4
Size Code
004 = 1/4”
005 = 5/16”
006 = 3/8”
008 = 1/2”
010 = 5/8”
012 = 3/4”
016 = 1”
020 = 1-1/4”
024 = 1-1/2”
032 = 2”
040 = 2-1/2”
048 = 3”
056 = 3-1/2”
064 = 4”
080 = 5”
096 = 6”
128 = 8”
160 = 10”
192 = 12”
224 = 14”
The Penflex Product to Fit Your Requirements
Size
(See chart at right)
Specifying Part Numbers for Braided Hose-on-Reels
721-1SB-6-004
Hose/Braid
Type
4 = 400 Series
7 = 700 Series
8 = 800 Series
9 = 900 Series
Braid Alloy
(only used when ordering
316 braid)
6 = 316L Stainless steel
Braid Layers
0 = none
1 = 1 layer
2 = 2 layers
Braid Type
HHB = Series 400
SB = Series 500,
600, 700
SHB = Series 800
HTSB = Series 900
MB = Monel
BB = Bronze
Hose Alloy
04 = 304 Stainless steel
21 = 321 Stainless steel
16 = 316L Stainless steel
40 = Monel
94 = Bronze
Specifying Part Numbers for 400 / 700 / 800 / 900 / 1400
Series Products
721-004
Hose Type
4 = 400 Series
7 = 700 Series
8 = 800 Series
9 = 900 Series
14 = 1400 Series
Hose Alloy
04 = 304 Stainless steel
21 = 321 Stainless steel
16 = 316L Stainless steel
40 = Monel
94 = Bronze
Size
(See chart at right)
Specifying Part Numbers for Braid
1SB-6-004
Braid Layers
0 = none
1 = 1 layer
2 = 2 layers
Braid Type
HHB = Series 400
SB = Series 700
SHB = Series 800
HTSB = Series 900
MB = Monel
BB = Bronze
Braid Alloy
(only used for
316 braid)
6 = 316L Stainless steel
Size
(See chart at right)
Size
(See Chart at right)
Specifying Part Numbers for P3 and P4 Products
P3
- H3021 - B3004 -004
Hose Alloy
16 = 316L Stainless Steel
21 = 321 Stainless Steel
Pitch
Blank =
standard pitch
C = Compressed
Braid Layers
Blank = 1 Layer
2 = 2 Layers
Hose
Series
Braid Alloy
04 = 304
16 = 316L
Size
(See Chart at right)
P4
- H4021 - B4004 -004
Hose Alloy
16 = 316L Stainless Steel
21 = 321 Stainless Steel
Braid Layers
Blank = 1 Layer
2 = 2 Layers
Hose
Series
Braid Alloy
04 = 304
16 = 316L
Pitch
Blank =
standard pitch
C = Compressed
Nominal I.D.
The nominal interior dimension of the hose in inches.
Part Number
This column shows part numbers to be used when ordering.
Braid Layers
This column shows the number of wire braid covering(s) required for the indicated pressure rating.
Braid Construction
Term applies to description of braid, i.e., 36 x 9 x. 016
36 = number of carriers or bands in a braid
9 = number of wires on each carrier
.016 = wire diameter in inches
Braid Coverage
The percentage of area covered by wire when referenced to the total cylinder surface area of the hose. 95% coverage
means that only 5% of the area is not covered by wire.
Nominal O.D.
The nominal exterior dimension of the hose in inches.
Pressure Ratings
The maximum working, maximum test and nominal burst pressures for each hose size are shown with welded on fittings.
All pressures listed in this catalog have been reduced by 20 percent to account for welding as the method of attachment.
Centerline Bend Radius – Dynamic
This column states, in inches, the minimum bend radius to which a hose may be bent when installed in conditions of
motion that occur on a regular or intermittent basis.
Centerline Bend Radius – Static
This column states, in inches, the minimum bend radius to which a hose size may be bent when installed in conditions
of no movement other than infrequent vibrations.
Weight
This column shows approximate weight per foot for each size and is given in pounds per foot.
Chart Terminology